Mateksys F722-HD Flight Controller OSD

Mateksys F722-HD Flight Controller OSD

Flight Controller F722-HD er en FC som matcher bra mot DJI HD. Den har innbygget barometer, blackbox og 5V + 8V BEC.30,5×30,5mm monteringshull og vekt på 6,5gram.

Spesifikasjoner

• MCU: 216MHz STM32F722RET6
• Bec: 5Vx2A og 8Vx2A
• Vekt: 6,5g
• Spenningsområde: 2-8s LiPo
• Størrelse: 36x36mm med 30.5xØ4mm-monteringshull med 3mm innlegg

Product details in English:

FC Specifications
MCU: 216MHz STM32F722RET6
IMU: MPU6000 (SPI)
Baro: BMP280 (I2C)
Blackbox: 32M-byte Flash memory (SPI)
OSD: Support external DJI OSD/FrskyOSD, No Analog MAX7456 OSD built-in
6x Uarts with built-in inversion
1x Softserial_Tx option
10x Dshot/PWM outputs
1x I2C
4x ADC (VBAT, Current, RSSI, AirSpeed)
2x SH1.0_8pin connector (Vbat/G/Curr/Rx3/S1~S10)
1x SH1.0_6pin connector for DJI FPV Air Unit
3x LEDs for FC STATUS (Blue, Red) and 3.3V indicator(Red)
Switchable 8V output
PWM camera control: Yes
TR/SA VTX control: Yes
WS2812 Led Strip : Yes
Beeper : Yes
RSSI: Yes
Analog Airspeed sensor: Yes
Digital Airspeed sensor: Yes

Power
Input: 9~36V (3~8S LiPo)
BEC: 5V 2A cont. (Max.3A)
BEC: 8V 2A cont. (Max.3A)
LDO 3.3V: Max.200mA
Battery Voltage Sensor: 1:10 (Scale 110)
No Current Sensor built-in
FC Firmware
BetaFlight unified target: MATEKF722HD(MTKS)
INAV target: MATEKF722PX

Physical
Mounting: 30.5 x 30.5mm, ?4mm with Grommets ?3mm
Dimensions: 36 x 36 x 5 mm
Weight: 6.5g

Including
1x FC F722-HD
6x Silicon grommets M4 to M3
1x SH1.0_8pin cable 5cm
2x SH1.0_8pin connectors
1x SH1.0_6pin to GH1.25_8pin cable 8cm